Avignon X - Brass
Product details
| As Shown: | Pacific Light Grey, Pacific White, Stone, Brass |
| Color Chart: | Solid Colors |
| Notes: | Recommended for dry vertical surfaces. Pattern can be custom ordered in any colors from the Pacific color chart. Minimum custom order quantity is 4 boxes (28.16 sq. ft.) Custom orders ship in 14-16 weeks. |
| Sq. Ft. Per Box: | 7.04 |
| Pieces Per Box: | 16 |
| Length: | 8" (20 cm) |
| Width: | 8" (20 cm) |
| Thickness: | .47" (1.2 cm) |
| Shape: | Square |
Technical Documents
Product Specifications
Installation Guidelines
Care & Maintenance
Review the brass-specific Product Specifications, Installation Guidelines, and Care & Maintenance PDFs before specifying or installing. Avoid abrasive cleaners, acidic products, and metal polishes unless compatibility with both the brass and cement has been confirmed.
Brass Inlay Cement Tile Product Information
Handmade cement tile with uncoated decorative brass inlay, embedded flush with the tile surface and mechanically secured by anchoring legs. Brass can develop a natural patina. Review applications and care before specifying or installing.
Recommended Applications
Suitable — within stated conditions
Conditional — project-specific review
Not recommended — outside general guidance
| Application | Guidance |
|---|---|
| Interior walls and dry-area bathroom walls | Suitable |
| Kitchen and vanity backsplashes | Suitable — seal cement and clean splashes promptly |
| Light-traffic interior floors | Conditional — review wear, slip, sealing and maintenance |
| Heavy-traffic interior floors | Not recommended |
| Shower and wet-area walls | Not recommended |
| Shower and wet-area floors | Not recommended |
| Exterior walls and floors | Not recommended |
| Freeze/thaw exposure | Not recommended |
| Pools and continuously submerged areas | Not recommended |
| Steam rooms and saunas | Not recommended |
| Fireplace surrounds | Project-specific review — no direct flame or excessive heat |
| Radiant floor heating | Project-specific review — movement and assembly suitability unverified |
This chart provides general selection guidance, not product certification. Finished brass/cement tiles have not been independently tested for wet DCOF, abrasion, breaking strength or other composite performance. A cement-tile sealer does not waterproof an assembly or necessarily protect brass from tarnishing. Confirm project requirements with a qualified installer.
Handmade Characteristics
Handmade cement tile may vary naturally in shade, tone, texture and dimension. Exposed brass may tarnish, develop a patina, or change in sheen over time; light scratching and wear may be visible. Inspect and blend tiles from multiple boxes before setting.
The manufacturer confirms that uncoated brass inlay sits flush with the cement surface, with anchoring legs extending into the tile body to help secure it. The brass alloy composition is awaiting supplier confirmation. Refer to each product listing for dimensions, thickness, box quantity and coverage.
See the process on our website: Watch How Our Brass Inlay Cement Tile Is Made.
Installation & Care
Use an installer experienced with handmade cement tile and decorative metal inlay. For suitable interior applications, confirm substrate, setting materials, grout and movement joints; test sealing, grout cleanup and protection procedures on spare tiles. General cement tile installation instructions may not address all brass-specific requirements.
Clean with a mild pH-neutral cleaner confirmed compatible with both cement and brass and use soft, nonabrasive tools. Avoid acids, strongly alkaline cleaners, ammonia, and routine abrasive cleaning. Because the brass is uncoated, natural oxidation or patina may develop. For restoration, the manufacturer recommends carefully treating the brass only with #400-grit sandpaper; this may scratch adjacent cement or damage sealer. Test first on a spare tile and contact Cement Tile Shop before restoration of installed tile. Do not use metal polishes or chemical tarnish removers without confirmed compatibility.