Filters

Secure Checkout
Handmade Tile & Distinctive Architectural Materials
Your Shopping Cart Is Empty

Secure Checkout

Scarpa Gradino

Scarpa Gradino
Purchase Scarpa Gradino
  • Scarpa Gradino

    • $11.00 per piece
    • $4.84 per sq.ft

    15-20% overage is recommended for cuts/waste/layout preferences and repairs.

    pieces needed    =     48 actual square feet

  • Select Size:
  • Order minimum: 48 square feet.
  • Availability: Ships in 12-16 weeks.

Product details


Notes: This collection has hand cut marble, granite, terracotta and terrazzo. Natural imperfections are an inherent characteristic of natural stone tiles. These imperfections include chipped edges, pitting, crazing (hairline cracks) and variations in thickness, color, shading and size. These imperfections are what gives marble and stone tiles their beautiful look and finish.
Sq. Ft. Per Piece: .44
Width: 8" (20 cm)
Length: 8" (20 cm)
Thickness: 0.787" (2 cm)
Pieces Per Box: 1 (sold by the piece)
Shape: Square
As Shown: Terrazzo Inlay
Collection: Scarpa Inlay Collection

Technical Documents

Product Specifications
Installation Guidelines
Care & Maintenance

Scarpa Inlay Terrazzo Product Information

Explore recommended applications, finish characteristics, and installation guidance for Scarpa Inlay Terrazzo products.

Recommended Applications

Suitable — within stated conditions Conditional — additional review required Not recommended — outside general guidance
ApplicationGuidance
Interior walls and dry bathroom wallsSuitable — verify tile weight, substrate and attachment
Kitchen and vanity backsplashesSuitable — protect against acids, oils and stains
Light-traffic interior floorsSuitable — verify finish, traffic and slip conditions
Commercial / heavy-traffic interior floorsConditional / project review — assess wear, wet-slip needs and maintenance
Shower and wet-area wallsConditional / project review — suitable waterproofed system and compatible materials
Shower and wet-area floorsConditional / project review — wet-slip evidence and waterproofing required
Exterior walls and floors without freezingConditional / project review — Conditional only with written product- and finish-specific factory approval; verify drainage, weather exposure and system
Exterior freeze/thaw exposureNot recommended — Not recommended without specific testing and approval
Pool decks / exterior wet walking surfacesConditional / project review — Conditional only for an approved slip-appropriate finish and installation; polished finishes require particular caution
Pools and continuously submerged areasNot recommended — Not recommended without written manufacturer approval
Steam rooms and saunasNot recommended — Not recommended without written manufacturer approval
Fireplace surrounds and radiant floor heatingConditional / project review — heat, movement and assembly design

Exterior suitability is not established for all colors, sizes or surface finishes. Manufacturer literature discusses outdoor use for some shot-blasted terrazzo, but standard polished products and Scarpa designs require separate confirmation. A 2024 sample wet pendulum result of 30 is not an ANSI wet DCOF classification. Verify slip resistance, moisture exposure, freeze/thaw exposure, installation design and code requirements for the actual product and application.

Handmade Characteristics

Pressed, cured and polished cement-based terrazzo incorporates decorative aggregates. Tile color, chip distribution, sheen and dimensions may vary. Inspect deliveries and dry-lay pieces from multiple boxes to approve the overall appearance before installation.

Scarpa Inlay construction and project-specific suitability should be confirmed with Cement Tile Shop. Confirm dimensions, thickness and coverage from the selected product listing; do not assume all finishes share the same performance.

Installation & Care

Use an installer experienced with large-format terrazzo. The 2023 MAPEI letter identifies Granirapid System or Ultraflex LFT Rapid mortar, Flexcolor CQ grout, Mapesil T Plus sealant and UltraCare Penetrating Plus sealer for suitable substrates; current product data and a project-specific system review control. Follow substrate flatness, coverage, back-buttering, movement joint, curing and sealing instructions.

Clean with a compatible pH-neutral cleaner, promptly remove spills, and avoid acid cleaners or abrasive polishing. Do not assume the factory sealer prevents staining or makes the assembly waterproof. Exterior installations require separate written approval.